Cubespawn (by Anonymous)

Login | register | register with OpenID Click here to register with OpenID

You are displaying the detail entry posted by Anonymous user on 2009-12-11 15:58:26
Click here to see the project start page

An open source, free, Flexible Manufacturing System (FMS) Cubic frames are built from 80/20 aluminum extrusion, at 1/2 meter, one meter, and possible larger sizes, Motion control is added, as appropriate for the desired funcion. A pallet mover is incorporated into the base of the cubes to move workpieces between cubes This project can be built DIY by anyone without restriction, following instructions on the site, or at some point for those who do not have the tools or the inclination, kits will be sold through the site. A standard electrical and data connector on each cube, plus mechanical latches or joining plates, allow the cubes to be connected to form a system. As of this writing (11/15/2009) one half meter cube with a partially implemented 3 axis cnc function has been built, using electronics from the RepRap[1] project. As additional cubes are designed with specific functions, multiple cubes can be connected in sequence to form "Lines" to build specific parts with multiple operations per part. The connection between cubes is a 4 pole high current plug and socket for power and a 6 pin low voltage connector for the EtherCat industrial variant of ethernet.